skip to main content

Document Cameras (DocCam)

The issue may be related to "Resolution" settings within the program for the doc cam. 
 
If you are using:
 
Ipevo Ziggy - The resoluion setting is at the top center of the "Presenter" program window. From the drop down choose "640x360".
 
1600 by 1200 Resolution
 
 
Epson - The resolution setting is at the top right corner of the "ArcSoft" program window. From the drop down choose "640x360".
 
640 by 360 Resolution 
 
Doing this should get it running without much delay (if any) on screen.